The rear panel comprises the following components (see Figure 2 on page 5):
•
Removable CompactFlash drive—The device must be powered off when you insert or remove the
CompactFlash card. The CTP150 platform does not provide a hard drive, nor is it required.
•
Removable AC power supply—Power input using a standard IEC power cord.
•
Fans—When the device is cool, the appliance fans spin at a slower speed to reduce noise and save energy.
As the device heats up, the fans run at a faster speed. In the event of fan failure, the hardware LED blinks
quickly and the remaining fan or fans run at full speed until the failed fan is replaced. The fans for this
model are not field replaceable units (FRUs).
Figure 2 on page 5 shows the CompactFlash drive with the cover plate removed.
Figure 2: CTP150 Chassis (Rear View)
g004481
Fans Compact
Flash drive
Handle
AC power
cord inlet
Ejector lever
RELATED DOCUMENTATION
Introducing CTP Series Platforms | 3
5
To Next Page
Loading...
Need help?
General
