Juniper CTP1000 Series Hardware Guide

CHAPTER 10
Unpacking and Inspecting the CTP Platform
IN THIS CHAPTER
Before You Unpack the CTP Platform | 87
Unpacking the CTP Device | 87
Inspecting Platform Components and Accessories | 88
If You Detect or Suspect Damage | 89
Contacting Juniper Networks | 89
Before You Unpack the CTP Platform
Before you begin unpacking the device, be sure you have the following tools:
•
No. 2 Phillips screwdriver
•
Utility knife
•
Mechanical lift, or at least two people to assist in lifting
RELATED DOCUMENTATION
Unpacking the CTP Device | 87
Inspecting Platform Components and Accessories | 88
If You Detect or Suspect Damage | 89
Contacting Juniper Networks | 89
Unpacking the CTP Device
Depending on the device, it may be delivered boxed, bolted, and strapped to a skid. For your convenience,
we recommend that you unpack the device in the location where you want to install it.
87

Juniper CTP1000 Series Specifications

General

Brand	Juniper
Model	CTP1000 Series
Category	Network Hardware
Language	English