Juniper CTP1000 Series Hardware Guide

CHAPTER 11
Installing the Chassis
IN THIS CHAPTER
Before You Install the CTP2000 Platform | 90
Installing the CTP2000 Platform in Freestanding Mode | 91
Special Guidelines for Installing CTP2056 Chassis in a Rack | 91
Installing the CTP2000 Platform in a Rack | 92
Before You Install the CTP2000 Platform
Before installing the platform:
•
Refer to the platform specifications for the particular CTP model or series.
•
Have a plan for installing the device that takes into consideration future expansion.
•
Have the tools and accessories needed to complete the installation.
•
Read and understand the clearance requirements for the front and back of the chassis for cable routing
and other unit access. See“CTP2000 Environmental Requirements” on page 40 for more information.
•
Read and understand the clearance requirements for the top and bottom of the chassis to ensure adequate
ventilation.
•
Prepare the equipment racks by measuring and marking space for each device and plenum you plan to
install.
RELATED DOCUMENTATION
Installing the CTP2000 Platform in Freestanding Mode | 91
Installing the CTP2000 Platform in a Rack | 92
90

Juniper CTP1000 Series Specifications

General

Brand	Juniper
Model	CTP1000 Series
Category	Network Hardware
Language	English