JVC DD-3 User Manual

22
Listening to radio broadcasts
2 Press [ TUNING] or [TUNING ]
repeatedly to select a radio sta-
tion.
• When the main unit has receive an FM ste-
reo broadcast, the “ST” (stereo) indicator
lights up in the display window.
• You can also select a radio station using the
automatic tuning.
■ Automatic tuning
Hold down [ TUNING] or [TUNING ] until
the frequency starts changing, and then
release the button.
• When the main unit has received a broad-
cast, the frequency automatically stops
changing.
• You can select a specific radio station while
searching for a broadcast. Press [ TUN-
ING] or [TUNING ] to stop the automatic
tuning when the desired frequency appears
in the display window.
NOTE
• If an FM stereo broadcast is difficult to hear
because of noise, you may be able to hear the
broadcast more easily by pressing [FM MODE]
to switch the sound to monaural reception. In
this case, the “MONO” (monaural) indicator
lights up in the display window. To return the
sound to stereo reception, press [FM MODE]
again.
Presetting radio stations in the main unit allows
you to easily tune in to a radio station.
You can store up to 30 FM radio stations and up to
15 AM radio stations.
1 Select a radio station you want to
store.
• Refer to “Selecting a radio station” on page
21.
2 Press [MEMORY].
• The preset number flashes in the display
window.
3 While the preset number is flash-
ing, press the number buttons to
select the preset number.
Example: When storing the radio station “AM
810 kHz” to the preset number “5”
4 While the selected number is flash-
ing, press [MEMORY] or [ENTER].
• “STORED” appears and the selected radio
station is stored.
NOTE
• When you store a radio station to a preset num-
ber to which another radio station has previously
been stored, the newly set radio station replaces
the previously stored radio station.
• You can also use 2 or 3 to select the preset
number in step 3.
■ When an FM or AM radio broadcast is
selected as the source
Press the number buttons to select
the preset number.
• You can also select the preset number by press-
ing 2 or 3.
Tuning in to a preset radio
station
Presetting radio stations
Tuning in to a preset radio station
DD-831[A_Ux]-05.fm Page 22 Friday, September 8, 2006 1:49 PM

JVC DD-3 Specifications

General

Audio decoders	Dolby Digital, DTS
RMS rated power	220 W
Audio output channels	3.1 channels
Subwoofer frequency range	30 - 230 Hz
Radio Data System (RDS)	Yes
Preset stations quantity	45
Optical disc player type	DVD player
Weight	3000 g
Dimensions (WxDxH)	445 x 286.4 x 55 mm

Weight and Dimensions

Subwoofer weight	12300 g
Subwoofer dimensions (WxDxH)	242 x 363 x 364 mm