JVC DD-3 User Manual

6
Connection
This part explains the procedure for connecting the
main unit to the computer via a router with an
Ethernet cable and confirming that the connection
is completed properly.
NOTE
• Before following this procedure, connect the
main unit, speakers and a TV referring to the
main volume of the operation manual for this
system.
• To connect the main unit to the computer
directly, refer to “Connecting the main unit to the
computer directly” on page 19.
This part explains the procedure for connecting the
main unit to the computer linked to the Internet via
a router.
• The diagram shown above has been simplified
by omitting the connection of the main unit,
speakers and a TV. Refer to the main volume of
the operation manual for connecting the devices
shown above.
• The diagrams of the Internet and modem are
omitted in the later explanations.
1 Connect one end of the Ethernet
cable (straight-through cable, not
supplied) to the LAN terminal on
the router.
2 Connect the other end of the
Ethernet cable to the LAN terminal
on the main unit.
Connecting the main unit to
the router
Internet Modem Router
To the LAN
terminal on the
router
Computer
Ethernet cable
(straight-
through cable,
not supplied)
Connection
DD-83[A_UX]-04.fm Page 6 Monday, September 11, 2006 11:05 AM

JVC DD-3 Specifications

General

Audio decoders	Dolby Digital, DTS
RMS rated power	220 W
Audio output channels	3.1 channels
Subwoofer frequency range	30 - 230 Hz
Radio Data System (RDS)	Yes
Preset stations quantity	45
Optical disc player type	DVD player
Weight	3000 g
Dimensions (WxDxH)	445 x 286.4 x 55 mm

Weight and Dimensions

Subwoofer weight	12300 g
Subwoofer dimensions (WxDxH)	242 x 363 x 364 mm