46
English
Reference
When a JVC-manufactured TV with AV COMPU
LINK II or III terminals is connected to the main
unit using these terminals, operating either the TV
or the main unit controls the other device at the
same time.
NOTE
• Some JVC-manufactured TVs have terminals
labeled “AV COMPU LINK”. These terminals are
no different from the [AV COMPU LINK-III] termi-
nal on the main unit of this system or, the “AV
COMPU LINK I/II” or “AV COMPU LINK” termi-
nal on other JVC-manufactured systems.
• Refer to “OTHERS” on page 39 for determining
the “AV COMPULINK MODE” setting.
• Also refer to the manual of the TV to be con-
nected to the main unit.
• The AV COMPU LINK function may not work for
some TVs when the main unit is connected to
the video 2 or video 3 terminal on the TV.
1 Turn on the main power of the TV.
2 Play back a disc/file.
• Refer to pages 22 – 24.
• The power of the TV is turned on.
• The input mode on the TV changes to the
video 1, video 2 or video 3 (DVD) input.
NOTE
• You can use this function only when “NO HDMI”
is selected for the monitor out type. (Refer to
page 13.)
Preparation for the AV
COMPU LINK function
Input terminal on the
TV
“AV COMPULINK
MODE” setting
Video 1 DVD2
Video 2 DVD3
Video 3 DVD1
Connection cable (not supplied)
Main unit (rear view)
JVC-manufactured TV
AV COMPU
LINK II or III
Operating the AV COMPU
LINK function
Using the AV COMPU LINK function
DD-83[J]-10.fm Page 46 Thursday, October 26, 2006 9:40 AM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
