45
Operating other devices using the remote control
Operate the remote control by pointing it at the TV.
.
NOTE
• When the remote control mode selector is slid to
[TV], some buttons may not work.
1 Slide the remote control
mode selector to [VCR/
DBS].
2 Press [VCR] or [DBS].
3 Hold down [VCR/DBS F].
• Hold down [VCR/DBS F] until you finish
step 5.
4 Press [ENTER] and release.
5 Press number buttons to enter the
manufacturer code.
Manufacturer codes for VCRs
Examples:
For a Hitachi VCR: Press [0], then [4].
For a Mitsubishi VCR: Press [1], then [3].
When the manufacturer of your VCR has 2 or more
codes, select the manufacturer codes in turn and
find the one that operates the VCR and the remote
control properly.
Remote
control button
Usage
[TV
F]
Turns on/off the TV.
[TV/VIDEO]
Changes between the TV and
video input.
[TV CHANNEL
+/
–
]
Changes channels.
[TV VOL +/
–
] Adjusts volume.
Number but-
tons (1-9, 0,
100+)
Slide the
remote control
mode selector
to [TV] in
advance.
Selects the
channels.
[TV RETURN]
Changes
between the
previously
selected chan-
nel and the cur-
rent channel.
Using the remote control for the TV
operation
Operating a VCR/DBS using
the remote control
Manufacturer Code
JVC 01, 02, 03
Emerson 11, 26
Fisher 29
Funai 10, 14, 15, 16
Gold Star 12
Hitachi 04
Mitsubishi 13
NEC 25
Panasonic 07, 17
Philips 09
RCA
05, 06
Samsung 24
Sanyo 21, 22, 23
Sharp 27, 28
Shintom 30
Sony 18, 19, 20
Zenith 08
Setting the manufacturer code
Operating other devices using the remote control (continued)
DD-831[A_Ux]-09.fm Page 45 Friday, September 8, 2006 12:28 PM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
