To Next Page

To Previous Page

English

Setting up the IP address

6 Confirm the values displayed in

“IP address:” and “Subnet mask:”.

Example:

Fill out the blank column with the values.

(The values are to be used in step 8 on page

15.)

7 Click [Cancel].

The dialog box is closed.

You have finished confirming the IP address of the

computer.

This part explains the procedure for setting up the

IP address of the main unit manually.

You can skip this part when the main unit and the

computer are connected to a router using a DHCP

function.

NOTE

• Before assigning the IP address to the main unit,

press [NETWORK 3] to select the connected

computer as the source. “NETWORK SETUP”

on the preference screen is disabled when

another source is selected.

(On the remote control)

1 Slide the remote con-

trol mode selector to

[AUDIO].

IP address

Subnet mask

Assigning the IP address to

the main unit

Number

buttons

Remote control

mode selector

DD-83[J].book Page 13 Thursday, September 28, 2006 9:16 AM

Questions and Answers:

Need help?

Do you have a question about the JVC DD-3 and is the answer not in the manual?

JVC DD-3 Specifications

General