To Next Page

To Previous Page

Operation

3-22

Table 3-2

Summary of SCPI commands (Models 2000 and 2010)

Command Description

FORMat command summary

:FORMat

:ELEMents <item list>

Command to specify data elements to send over the bus.

Specify data elements (READing, CHANnel, UNITs).

ROUTe command summary

:ROUTe

:CLOSe <list>

:STATe?

:OPEN:ALL

:MULTiple

:CLOSe <list>

:STATe?

:OPEN <list>

:SCAN

[:INTernal] <list>

:LSELect <name>

Commands to control scanner card:

Close speciﬁed channel (or channel pair).

Query closed channel (or channel pair).

Open all channels.

Path to close and open multiple channels:

Close speciﬁed channels.

Query closed channels.

Open speciﬁed channels.

Path to scan channels.

Conﬁgure internal scan list.

Select scan list (INTernal, EXTernal, or NONE) and start scan.

SENSe command summary

[SENSe[1]]

:TEMPerature

:TCouple

:TYPE <name>

:RJUNction

:RSELect <name>

:SIMulated <n>

:REAL

:TCOefﬁcient <n>

:OFFSet <n>

Sense subsystem.

Path to conﬁgure temperature measurements:

Conﬁgure thermocouple sensor:

Select thermocouple type (J, K, T (also N for Model 2010)).

Conﬁgure reference junction:

Select reference type (SIMulated or REAL).

Specify simulated temperature in °C (0 to 50).

Conﬁgure real reference junction:

Specify temp coefﬁcient (-0.09999 to 0.09999).

Specify voltage coefﬁcient at 0°C (-0.09999 to 0.09999).

TRACe command summary

:TRACe

:POINts <NRf>

:FEED <name>

:CONTrol <name>

:DATA?

Commands to conﬁgure buffer:

Specify buffer size (2 to 1024).

Select source of readings (SENSe[1], CALCulate[1], NONE).

Select buffer control mode (NEVer or NEXT).

Read all readings in buffer.

Trigger command summary

:INITiate

[:IMMediate]

:CONTinuous <b>

:TRIGger

:COUNt <n>

:DELay <n>

:AUTO <b>

:SOURce <name>

:TIMer <n>

Initiation commands:

Initiate one trigger cycle.

Enable or disable continuous initiation.

Trigger layer commands:

Specify total number of channels to scan (1 to 9999).

Set delay between scanned channels (0 to 999999.999 sec).

Enable or disable auto delay.

Select control source (IMMediate, TIMer, MANual, BUS, EXTernal).

Set timer interval (0 to 999999.999 sec).

UNITs command summary

:UNIT

:TEMPerature <name>

Command to select temperature units:

Select temperature measurement units (C, F, or K).

Brand	Keithley
Model	2001-TCSCAN
Category	Test Equipment
Language	English

Keithley 2001-TCSCAN User Manual

Table of Contents

Other manuals for Keithley 2001-TCSCAN

Questions and Answers:

Keithley 2001-TCSCAN Specifications

Related product manuals