Keithley 2110-100 User Manual

Model
2110 5½ Digit Multimeter Reference Manual Section 5:
Remote commands
2110-901-01 Rev. C/August 2013 5-57
[SENSe:]TEMPerature:SPRTD:B4 <n>|MIN|MAX
Use this command to set the B4 coefficient for the SPRTD sensor.
Parameters
parameter description
-1.1 to +1.1
B4 coefficient.
MINimum
Select the minimum coefficient.
MAXimum
Select the maximum coefficient.
Query
command description
[SENSe:]TEMPerature:SPRTD:B4?
Query the sensor B4 coefficient.
[SENSe:]TEMPerature:SPRTD:B4? MIN
Query the minimum sensor B4 coefficient.
[SENSe:]TEMPerature:SPRTD:B4? MAX
Query the maximum sensor B4 coefficient.
Details
Refer to the following topic in the Temperature measurement (on page 3-17) section for more information about
the B4 coefficient: RTD coefficients and temperature calculation (on page 3-19).
[SENSe:]TEMPerature:SPRTD:AX <n>|MIN|MAX
Use this command to set the AX coefficient for the SPRTD sensor.
Parameters
<n> description
-1.1 to +1.1
Select the AX coefficient for the SPRTD sensor.
MINimum
Select the minimum coefficient.
MAXimum
Select the maximum coefficient.
Query
command description
[SENSe:]TEMPerature:SPRTD:AX?
Query the sensor AX coefficient.
[SENSe:]TEMPerature:SPRTD:AX? MIN
Query the minimum sensor AX coefficient.
[SENSe:]TEMPerature:SPRTD:AX? MAX
Query the maximum sensor AX coefficient.
Details
Refer to the following topic in the Temperature measurement (on page 3-17) section for more information about
the AX coefficient: RTD coefficients and temperature calculation (on page 3-19).

Keithley 2110-100 Specifications

General

Brand	Keithley
Model	2110-100
Category	Multimeter
Language	English