Keithley 3730 Reference Manual

Series 3700A System Switch/Multimeter Reference Manual Section 11: TSP command reference
3700AS-901-01 Rev. D/June 2018 11-9
Example
beeper.enable = beeper.ON
beeper.beep(2, 2400)
Enables the beeper and generates a
two-second, 2400 Hz tone.
Also see
beeper.beep() (on page 11-8)
bit.bitand()
This function performs a bitwise logical AND operation on two numbers.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Function
No
Usage
result = bit.bitand(value1, value2)
result
Result of the logical AND operation
value1
Operand for the logical AND operation
value2
Operand for the logical AND operation
Details
Any fractional parts of value1 and value2 are truncated to form integers. The returned result is
also an integer.
Example
testResult = bit.bitand(10, 9)
print(testResult)
Performs a logical AND operation on decimal 10
(binary 1010) with decimal 9 (binary 1001), which
returns a value of decimal 8 (binary 1000).
Output:
8.00000e+00
Also see
Bit manipulation and logic operations (on page 9-21)
bit.bitor() (on page 11-9)
bit.bitxor() (on page 11-10)
bit.bitor()
This function performs a bitwise logical OR operation on two numbers.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Function
No
Usage
result = bit.bitor(value1, value2)
result
Result of the logical OR operation
value1
Operand for the logical OR operation
value2
Operand for the logical OR operation

Keithley 3730 Specifications

General

Brand	Keithley
Model	3730
Category	Multimeter
Language	English