Keithley 3730 Reference Manual

Section 11: TSP command reference Series 3700A System Switch/Multimeter Reference Manual
11-238 3700AS-901-01 Rev. D/June 2018
eventlog.clear()
This function clears the event log.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Function
Yes
Usage
eventlog.clear()
Details
This command removes all messages from the event log.
Also see
eventlog.all() (on page 11-237)
eventlog.count (on page 11-238)
eventlog.enable (on page 11-239)
eventlog.next() (on page 11-240)
eventlog.overwritemethod (on page 11-241)
eventlog.count
This attribute returns the number of unread events in the event log.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (R)
Yes
Instrument reset
Clearing event log
Reading event log
Not applicable
Not applicable
Usage
N = eventlog.count
N
The number of events in the event log
Example
print(eventlog.count)
Displays the present number of events in the
instrument event log.
Output looks similar to:
3.00000e+00
Also see
eventlog.all() (on page 11-237)
eventlog.clear() (on page 11-238)
eventlog.enable (on page 11-239)
eventlog.next() (on page 11-240)
eventlog.overwritemethod (on page 11-241)

Keithley 3730 Specifications

General

Brand	Keithley
Model	3730
Category	Multimeter
Language	English