Keithley 3730 Reference Manual

Series 3700A System Switch/Multimeter Reference Manual Section 11: TSP command reference
3700AS-901-01 Rev. D/June 2018 11-333
scan.trigger.measure.clear()
This function clears the measure event detector.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Function
Yes
Usage
scan.trigger.measure.clear()
Details
This function sets the measurement event detector of the trigger model to the undetected state.
Example
scan.trigger.measure.clear()
Clears the measurement event detector.
Also see
Scanning and triggering (on page 5-23)
scan.trigger.measure.set()
This function sets the measurement event detector to the detected state.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Function
Yes
Usage
scan.trigger.measure.set()
Details
This function sets the measurement event detector of the trigger model to the detected state.
Example
scan.trigger.measure.set()
Sets the measurement event detector to the
detected state.
Also see
Scanning and triggering (on page 5-23)

Keithley 3730 Specifications

General

Brand	Keithley
Model	3730
Category	Multimeter
Language	English