7.5 Initial Commissioning
In order to obtain exact weighing results with the electronic balances, your balance
must have reached the operating temperature (see warm-up time chap.1). For this
warm-up time the balance must be connected to the power supply (mains
connection).
The accuracy of the balance depends on the local acceleration of gravity.
Strictly observe hints in chapter Adjustment.
7.6 Connection of peripheral appliances
Before connecting or disconnecting the auxiliary equipment (printer, PC) to the data
interface, the balance must be disconnected from mains without fail!
With your balance, only use accessories and peripheral devices by KERN, as they
are ideally tuned to your balance.
To Next Page
Loading...
Need help?
General
