TPES-B_TPEJ-B-BA-e-2319 56
14.2 Using the totalizing function
The error message <t-Err> appears if you have not placed the samples
correctly (More information: see chap. 21.1)
Set the balance to <2C. Ad.M 1> (see
chap. 14)
Place the first sample on the weighing
plate and wait until the display shows an
asterisk <*>.
Weight value is stored
An acoustic signal sounds and <Σ> is
briefly displayed together with the weight
total
Remove sample from weighing plate
(balance performs automatic zeroing)
Wait until the balance shows <0>.
Place new sample on weighing plate and
repeat steps
To Next Page
Loading...
Need help?
General
