Features of your vehicle
544
LCD Display (for type B cluster)
僅 Blind-Spot Collision Warning radar
blocked (if equipped)
僅 High Beam Assist malfunction (if
equipped)
僅 LED headlamp malfunction (if
equipped)
僅 TPMS failure, low pressure (if
equipped), etc.
At this time, a Master Warning icon
( ) will appear on the LCD display. If
the warning situations is solved, the
master warning light will be turned off
and the Master warning icon will disap
-
pear.
(5) Information mode
This mode informs of the digital speed
-
ometer.
* For controlling the LCD modes, refer to
"LCD Display Control" on page 4-43.
Driving Assist mode (if equipped)
This mode displays the state of :
僅 Lane Keeping Assist (if equipped)
Lane Following Assist (if equipped)
僅 Driver Attention Warning (if equipped)
* For more details, refer to each system
information "Driving your vehicle" on
page 5-5.
Settings
To change the Driver Assistance set
-
tings, press the OK button on the steer
-
ing wheel for more than 1 second when
the Driving Assist mode is displayed.
While driving, please do not change the
setting mode. It may distract your atten
-
tion and cause an accident.
The information provided may differ
depending on which functions are appli
-
cable to your vehicle.
User Settings Mode (for type B
cluster)
On this mode, you can change setting of
the doors, lamps, and so on.
Item Explanation
Warning Timing Normal/Late
Driver Attention
Warning
Leading Vehicle Departure Alert/Inatten
-
tive Driving Warning
Forward Safety Active Assist/Warning Only/Off
Lane Safety
Standard LKA/Lane Departure Warning/
Off
Blind-Spot Safety Warning Only/Off
Parking Safety Rear Cross-Traffic Safety
To Next Page
Loading...
Need help?
General
