Features of your vehicle
1104
Windshield defrosting and defogging
Automatic climate control system
1. Turn the ignition switch to the ON
position.
2. Select the defroster position before
pressing the defroster button ( ).
3. While pressing the air conditioning
button (A/C), press the air intake con
-
trol button at least 5 times within 3
seconds.
The indicator on the air intake button
blinks 3 times with 0.5 second of inter
-
val. It indicates that the defogging logic
is canceled or returned to the pro
-
grammed status.
If the battery has been discharged or
disconnected, it resets to the defog logic
status.
Auto defogging system (if
equipped)
Auto defogging reduces the possibility
of fogging up the inside of the wind
-
shield by automatically sensing the
moisture inside the windshield and air
flow toward the windshield can increase.
The auto defogging system operates
when the AUTO mode is on.
This indicator illuminates when
the auto defogging system
senses moisture on the inside of
the windshield and is activated.
If more moisture is in the vehicle, the
auto defogging system addresses
excess moisture on the inside of the
windshield in stages as follows:
Step 1 : Operating the air conditioning
Step 2 : Outside air position
Step 3 : Blowing air flow toward the
windshield
Step 4 : Increasing air flow toward the
windshield
If your vehicle is equipped with the auto
defogging system, it is automatically
activated when the conditions are met.
However, if you would like to deactivate
the auto defogging system, keep the
front defroster button pressed longer
than 3 seconds.
To Next Page
Loading...
Need help?
General
