Driving your vehicle
605
Cruise Control (CC)
Cruise Control operation
Setting set speed
1. Press the Driving Assist ( ) button
on the steering wheel to turn Cruise
Control on. The CRUISE indicator will
illuminate.
2. Accelerate to the desired speed,
which must be more than 20 mph (30
km/h).
3. Push the SET- switch down and
release it. The SET indicator (Type A)
or the set speed on the LCD screen
(Type B) will illuminate.
4. Release the accelerator pedal.
On a steep slope, the vehicle may
slightly slow down or speed up while
driving uphill or downhill.
Increasing set speed:
僅 Push the RES+ switch up and release
it immediately. The set speed will
increase by 1 mph (1 km/h) each time
the switch is operated in this manner.
僅 Push the RES+ switch up and hold it
while monitoring the set speed on the
cluster. The set speed will increase to
the nearest multiple of 5 mph (10 km/
h) at first, and then increase by 5 mph
(10 km/h) each time the switch is
operated in this manner.
Release the switch when the desired
speed is shown and the vehicle will
accelerate to that speed.
Decreasing set speed:
僅 Push the SET- switch down and
release it immediately. The set speed
To Next Page
Loading...
Need help?
General
