77
4
4
Features of your vehicle Lighting
Type B
The ignition switch must be on for the
turn signals to function. To turn on the
turn signals, move the lever up or down
(A). The green arrow indicators on the
instrument panel indicate which turn
signal is operating.
They will self-cancel after a turn is com
-
pleted. If the indicator continues to flash
after a turn, manually return the lever to
the OFF position.
To signal a lane change, move the turn
signal lever slightly and hold it in posi
-
tion (B). The lever will return to the OFF
position when released.
If an indicator stays on and does not
flash or if it flashes abnormally, one of
the turn signal bulbs may be burned out
and will require replacement.
One-touch lane change function
To activate a one-touch lane change
function, move the turn signal lever
slightly and then release it. The lane
change signals will blink 3, 5 or 7 times.
You can choose one-touch lane change
blinking function in “One touch turn sig
-
nal” of “User setting”. Refer to "User Set
-
tings Mode (for type B cluster)" on page
4-54.
If an indicator flash is abnormally quick
or slow, the bulb may be burned out or
have a poor electrical connection in the
circuit.
Front fog light (if equipped)
Type A
Type B
Fog lights are used to provide improved
visibility when visibility is poor due to
fog, rain or snow, etc.
The fog lights will turn on when the fog
light switch (1) is turned on after the
parklight is turned on.
To turn off the fog lights, turn the fog
light switch (1) to the OFF position.
To Next Page
Loading...
Need help?
General
