Features of your vehicle
764
Lighting
High Beam Assist (HBA) (if
equipped)
High Beam Assist is a function that auto
-
matically adjusts the headlamp range
(switches between high beam and low
beam) according to the brightness of
other vehicles and road conditions.
Operating condition
1. Place the light switch in the AUTO
position.
2. Turn on the high beam by pushing the
switch away from you. High Beam
Assist ( ) indicator will illuminate.
3. High Beam Assist will turn on when
vehicle speed is above 25 mph (40
km/h).
僅 If the switch is pushed away when
High Beam Assist is operating, High
Beam Assist will turn off and the
high beam will be on continuously.
High Beam Assist ( ) indicator
will turn off.
僅 If the switch is pulled towards you
when the high beam is on with
operating High Beam Assist, High
Beam Assist will turn off.
4. If the light switch is placed to the
headlamp position, High Beam Assist
will turn off and the low beam will be
on continuously.
The high beam switches to low beam in
the below conditions.
僅When High Beam Assist is off.
僅 When the light switch is not in the
AUTO position.
僅 When the headlamp is detected from
the on-coming vehicle.
僅 When the tail lamp is detected from
the front vehicle.
僅 When the surrounding is bright
enough high beams are not needed.
僅 When streetlights or other lights are
detected.
僅 When vehicle speed is below 22 mph
(35 km/h).
僅 When headlamp/taillamp of bicycle/
motorcycle is detected.
Turn signals and lane change sig
-
nals
Type A
To Next Page
Loading...
Need help?
General
