Specifications, Consumer information
and Reporting safety defects
68
Recommended lubricants and capacities
Recommended lubricants and capacities
To help achieve proper engine and powertrain performance and durability, use only lubricants of the
proper quality. The correct lubricants also help promote engine efficiency that results in improved fuel
economy. These lubricants and fluids are recommended for use in your vehicle.
* 1 : Refer to the recommended SAE viscosity numbers on the next page.
* 2 : Requires <API SN PLUS (or above) Full synthetic> grade engine oil. If a lower
grade engine oil (mineral oil including Semisynthetic) is used, then the engine oil
and engine oil filter must be replaced as indicated severe maintenance condition.
* 3 : If genuine oil that is developed for best performance is not used, you may expe
-
rience transmission performance issues.
Lubricant Volume Classification
Engine oil
*1*2
(drain and refill)
Smart
-
stream G1.6
4.0 US qt. (3.8 L)
Full synthetic API SN PLUS/SP or ILSAC
GF-6
Intelligent variable transmission
*3
6.87 US qt. (6.5 L)
MICHANG SP-CVT1, Kia genuine SP-CVT1
Coolant 5.81 US qt. (5.5 L)
Mixture of antifreeze and water (Eth
-
ylene-glycol with phosphate based
coolant for cooling device)
Brake fluid
0.7~0.8 US qt.
(0.7~0.8 L)
FMVSS116 DOT-4
Fuel 11.9 US gal (45 L) Unleaded gasoline
To Next Page
Loading...
Need help?
General
