Service and Repair Manual Repair
Fuel system
XX = Loctite 243
YY = Loctite 577
**Refer to screws reuse rules. (For more information see: 5.3.2 Screws pre-tightening, reuse and
marking, page 264.)
3.6.5 Fuel filters removal and installation
Previous tasks
q Disconnect fuel pipes and sensors.
q Close fuel supply.
Specific safety instructions
Not applicable.
Special tools
Not applicable.
Consumables and equipment
– Rags
– Cleaner
– Bucket for fuel
Overview
Fig. 146: Task overview
1 Fuel filter 4 Flange joint
2 Flange joint 5 Flange joint
3 Flange joint 6 Screw (M10)
KD62V12 33525088601_7_1 EN_US
2021-07
© 2021 by Kohler Co. All rights reserved.
127