Service and Repair Manual Safety
Accessible areas
2.8.4 Signage recommendations
Information
The machinery owner is responsible to mark the hazardous areas and the fail-safe devices.
The signs must withstand the ambient conditions, be kept visible and legible during the entire life
cycle.
Additional signs and measures according to project standards and local regulations and standards
are possible. For example: the signs for the United States market shall comply with ANSI Z535.4.
Following warning signs must be clearly visible and mounted in the accessible areas.
Sign
(ISO 7010)
Description
ISO 7010/W012 – Warning sign - Electricity
Death or serious injury due to electrical shocks!
(For more information see: 2.6.5 Preventing electrical hazards, page 48.)
ISO 7010/W017 – Warning sign - Hot surface
Severe injuries due to hot surfaces!
(For more information see: 2.6.2 Preventing burns, page 46.)
ISO 7010/W025 – Warning sign - Counterrotating rollers
Severe injuries due to drawing-in movement!
(For more information see: 2.6.1 Preventing bruising, page 46.)
ISO 7010/P007 - Prohibition sign - No access for people with active implanted
cardiac devices
Death or serious injury due to electromagnetic fields!
(For more information see: 2.6.8 Preventing electro-magnetic hazards, page 49.)
ISO 7010/M002 – Mandatory action sign - Refer to instruction manual/booklet
In order to ensure that all residual risks are known by the personnel, the system
documentation must be read and understood. Make sure that all residual risks
according to the risk assessment are reflected in the system documentation.
Provide documentation to the personnel according to the "Target audience".
Tab. 10: Engine area signs requirement
KD62V12 33525088601_7_1 EN_US
2021-07
© 2021 by Kohler Co. All rights reserved.
53
To Next Page
Loading...
Need help?
General
