Operation and Maintenance Manual Maintenance
Lubricating system
5.7.2 Checking prelubricating pump (optional) — SL103
Fig. 57: Prelubricating pump
u Check for abnormal noise when operating.
u Check pump for leaks.
u Control pump functions.
u Identify and report any failure. Let perform any repair work by the competent personnel.
5.7.3 Checking the engine oil level — SL001
q Engine stopped since at least 8 hours.
q Preparatory maintenance activities are fullfilled. (For more information see: 5.5 Preparatory
maintenance activities, page 90) .
The location of the dipstick and the oil filler neck vary according to engine type.
The dipstick is located on the right side of the engine.
The oil filler neck is located on the oil pan on the right side, the flywheel housing or on the cylinder
head.
KD83V16 33521030601_0_1 EN_US
2018-07
© 2018 by Kohler Co. All rights reserved.
101
To Next Page
Loading...
Need help?
General
