Operation and Maintenance Manual Safety
Operating and maintenance areas
2.8.4 Signage recommendations
Information
The machinery owner is responsible to mark the hazardous areas and the fail-safe devices.
The signs must withstand the ambient conditions, be kept visible and legible during the entire life
cycle.
Additional signs and measures according to project standards and local regulations and standards
are possible. For example: the signs for the United States market shall comply with ANSI Z535.4.
Following warning signs must be clearly visible and mounted in the accessible areas.
Sign
(ISO 7010)
Description
ISO 7010/W012 – Warning sign - Electrical voltage Lethal or heavy injury due to
electrical shocks
(For more information see: 2.6.5 Preventing electrical hazards, page 42)
ISO 7010/W017 – Warning sign - Hot surface Severe injuries due to hot surfaces!
(For more information see: 2.6.2 Preventing burns, page 41)
ISO 7010/W025 – Warning sign - Counter rotating rollers Severe injuries due to
drawing-in movement!
(For more information see: 2.6.1 Preventing bruising, page 40)
ISO 7010/P007 - Prohibition sign - No access with cardiac pacemaker or
implanted defibrillators Lethal or heavy injury due to electromagnetic fields!
(For more information see: 2.6.8 Preventing electro-magnetic hazards, page 43)
ISO 7010/M002 – Mandatory sign - Refer to instruction manual Observe instruc-
tions
In order to ensure that all residual risks are known by the personnel, the system
documentation must be read and understood. Make sure that all residual risks
according to the risk assessment are reflected in the system documentation.
Provide documentation to the personnel according to the "Target audience".
Tab. 13: Engine area signs requirement
KD83V16 33521030601_0_1 EN_US
2018-07
© 2018 by Kohler Co. All rights reserved.
47
To Next Page
Loading...
Need help?
General
