.
OPERATION
EXPLANATION OF COMPONENTS
METHOD OF OPENING AND CLOSING CAP WITH LOCK (FOR THE FUEL TANK FILLER PORT)
TO OPEN THE CAP
1.
Insert the key into the key slot.
2.
Turn the key clockwise, align the key groove with mark (1) on
the cap, then open the cap.
Position (A): OPEN
Position (B): LOCK
TO LOCK THE CAP
1.
Turn the cap until tight, then insert the key into the key slot.
2.
Turn the starting switch key to LOCK position (B), then remove the key.
METHOD OF OPENING AND CLOSING CAP WITH LOCK (FOR THE HYDRAULIC TANK FILLER
PORT)
TO OPEN THE CAP
1.
Insert the key into the key slot.
2. Turn the starting switch key counterclockwise and bring the
rotor groove in line with the aligning mark (1) on the cap. Turn
the cap slowly until a "clicking" sound is made. This releases
the lock and allows the cap to be opened.
Position (A): OPEN
Position (B): LOCK
TO LOCK THE CAP
1. Screw the cap into place.
2.
Turn the starting switch key to LOCK position (B), then remove the key.
3 - 59
To Next Page
Loading...
Need help?
General
