.
MAINTENANCE
SERVICE PROCEDURE
CLEAN ELEMENT IN AIR CONDITIONER FRESH AIR FILTER
WARNING
If compressed air is used, there is danger that dirt may fly and cause personal injury.
Always wear protective glasses, dust mask, and other protective equipment.
If the air conditioner has been used, the air filter should be cleaned.
Stop the air conditioner before cleaning the element.
Articulate the machine fully to the right before replacing the air filter element.
1.
Insert the starting key into key slot (1), release the lock, loosen
knob (2), and open cover (3).
2.
Take out element (4) and clean it.
3. Blow dry compressed air (less than 0.2 MPa (2.1 kg/cm
2
, 30.0
PSI)) from the inside of the element along its folds. Then blow
the compressed air from the outside along the folds, and again
from the inside.
Replace the filter with a new part if the clogging cannot be
removed with compressed air, or if it has been used for 1 year.
4. After cleaning, return filter (4) to its original position and close
the cover. Use the starting switch key to lock the cover. Do not
forget to remove the starting switch key.
REMARK
If the filter becomes clogged, the air flow will be reduced, and there will be an abnormal noise from the air conditioner
unit.
4 - 41
To Next Page
Loading...
Need help?
General
