.
SAFETY
GENERAL PRECAUTIONS COMMON TO OPERATION AND MAINTENANCE
PRECAUTIONS WHEN LEAVING MACHINE
If the proper procedures are not taken when parking the machine,
the machine may suddenly move off by itself, and this may lead to
serious personal injury or death. Always do the following.
When leaving the machine, always lower the work equipment
completely to the ground, set work equipment lock lever (1) to
the lock position (L), set parking brake switch (2) to the ON
position (A), and stop the engine.
In addition, lock all parts, always take the key with you, and
leave it in the specified place.
EMERGENCY EXIT FROM OPERATOR'S CAB
On machines fitted with a cab, a door is installed on the left side and an emergency escape door is installed on the
right side. If the door on the left side does not open, escape from the emergency door on the right side.
PRECAUTIONS WHEN CLEANING CAB GLASS
Always keep the cab glass clean to ensure good visibility when operating.
When cleaning the front glass, pay careful attention to the safety of your footing on the platform on the left or right
of the operator's cab or on the step on the front fender so as not to fall off the machine.
For cab glass cleaning procedures, see "WALK-AROUND CHECK (PAGE 3-99)" in this manual.
2 - 18
To Next Page
Loading...
Need help?
General
