.
OPERATION
EXPLANATION OF COMPONENTS
ACCELERATOR PEDAL
This pedal (8) controls the engine speed and output.
The engine speed can be freely controlled between low idle and full
speed.
STEERING TILT LOCK LEVER
WARNING
Stop the machine before adjusting the tilt of the steering wheel. If this operation (adjustment) is carried out while the machine is
moving, it may lead to a serious accident or personal injury.
This lever is used to hold the steering wheel in position.
(F) FREE position: Steering wheel can be moved to front, rear, up,
and down
(L) LOCK position: Steering wheel is held in position
The adjustment amounts are as follows.
Up-down
movement
When at
0 mm (0 in)
When moved up to
40 mm (1.6 in)
Tilt amount
0 - 105 mm
(0 - 4.1 in)
0 - 130 mm
(0 - 5.1 in)
CAP WITH LOCK
The fuel tank filler port and the hydraulic tank filler port are
equipped with locks.
Use the starting switch key to open and close the cap.
3 - 58
To Next Page
Loading...
Need help?
General
