Komatsu WA380-6 Service Manual

.
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
(Machines fitted with 23.5R25A L3 tires)
Item Item
WA380-6 standarad specification machine
(when using POWER mode)
Machine weight
(with bolt on cutting edge)
kg (lb) 17,500 (38,588)
Normal load kg (lb) 5,280 (11,642)
Bucket capacity Heaped m
3
(cu.yd) 3.3 (2.5)
Engine model - Komatsu SAA6D107E-1
Flywheel horse power kW (HP)/rpm 142 (191)/2,100
A Overall length mm (ft in) 8,140 (26' 8")
B Overall height mm (ft in) 3,390 (11' 1")
C Max.dimension when shaking bucket mm (ft in) 5,600 (18' 4")
D Overall width mm (ft in) 2,780 (9' 1")
E Min. ground clearance mm (ft in) 455 (1' 6")
F Bucket width mm (ft in) 2,905 (9' 6")
G Clearance Cutting edge [BOC tip] mm (ft in) 3,035 (9' 11") [2,950 (9' 8")]
H Reach Cutting edge [BOC tip] mm (ft in) 1,105 (3' 8") [1,150 (3' 9")]
I Dump angle degrees 49
Min. turning radius
Out of chassis mm (ft in) 7,190 (23' 7") [7,220 (23' 8")]
Center of out side tire mm (ft in) 6,320 (20' 9")
Permissible towing load kN (kg) 115 (11,700)
Travel speed
Forward
1st km/h (MPH) 6.6 (4.1)
2nd km/h (MPH) 11.5 (7.2)
3rd km/h (MPH) 20.2 (12.6)
4th km/h (MPH) 34.0 (21.3)
Reverse
1st km/h (MPH) 7.1 (4.4)
2nd km/h (MPH) 12.3 (7.7)
3rd km/h (MPH) 21.5 (13.4)
4th km/h (MPH) 35.5 (22.2)
5 - 2

Komatsu WA380-6 Specifications

General

Brand	Komatsu
Model	WA380-6
Category	Compact Loader
Language	English