3-47
24. SERVICE PROCEDURE 24. SERVICE PROCEDURE
24.3.12 CHECK FLASHING OF LAMPS, CHECK FOR DIRT
OR DAMAGE
Check for lamps lighting.
1. Turn the starting switch 1 to ON.
2. Check for the function of lamp switch 2 at A, B and C
positions.
A: OFF
B: Tail lamps, panel box, side clearance lamps (option) and number
plate lamps (option) light up.
C: Head lamps light up in addition to lamps lighting up at position
B.
3. Check for lighting of the reverse lamps by positioning the
directional lever 3 in REVERSE.
Check for sound of buckup buzzer (option)
4. Check for lighting of brake lamps by depressing brake pedal 4.
Check for flashing of turn signal lamps.
1. Turn the starting switch 1 to ON.
2. Check for function of turn signal lever 2 at A and B positions.
A: Left turn signal lamps (front and rear) flashes.
B: Right turn signal lamps (front and rear) flashes.
24.3.13 CHECK ENGINE EXHAUST COLOR AND SOUND
24.3.14 CHECK OPERATION OF GAUGES
24.3.15 CHECK DIRECTION OF REAR VIEW MIRROR,
CHECK FOR DIRT OR DAMAGE
To Next Page
Loading...
Need help?
General
