2-37
12.7 STOPPING MACHINE
WARNING
‡ Avoid stopping suddenly. Give yourself ample room when
stopping.
‡ Do not park the machine on slopes.
If the machine has to be parked on a slope, set it facing
directly down the slope, then dig the bucket into the ground
and put blocks under the tires to prevent the machine from
moving.
‡ If the control lever is touched by accident, the work equip-
ment or the machine may move suddenly, and this may lead
to a serious accident. Before leaving the operator’s compart-
ment, always set the safety lock lever securely to the LOCK
position.
NOTICE
Never use the parking brake pedal to brake the machine when
traveling except in an emergency. Apply the parking brake only
after the machine has stopped.
1. Release accelerator pedal 1, and depress brake pedals 2 to stop
the machine. The left and right brake pedals are interconnected,
so the machine can be stopped by pressing either of the brake
pedals.
2. Place directional lever 3 in N (neutral) and safety lock to the
LOCK position.
3. Depress parking brake pedal 4 to LOCK to apply the parking
brake.
Check that the parking brake pilot lamp has lighted up.
4. Release brake pedal 2.
12. OPERATION 12. OPERATION
To Next Page
Loading...
Need help?
General
