Method for resetting “Trip Meter”
1.
Select “Trip Meter” on “Machine Setting and Information”
menu screen, then press ENTER switch (4).
2.
The screen changes to “Trip Meter” resetting confirmation
screen.
Press ENTER switch (4) to reset “Trip Meter”, and then the
screen returns to “Machine Setting and Information” menu
screen.
REMARK
When the resetting is not necessary, press RETURN
switch (3).
AUTO IDLE STOP TIMER SETTING
The auto idle stop function stops the engine automatically when the engine is operated continuously at idle for a
set time.
The auto idle stop works only when all of the following conditions are met.
• The engine is running normally.
• The machine is stopped.
• The accelerator pedal is not depressed.
• The transmission is in NEUTRAL.
• The engine is not in warm-up operation.
• The engine coolant and hydraulic oil are not overheating.
• Aftertreatment devices are not in regeneration.
• The parts of DEF system are not in thawing control.
You can change the set time to operate the auto idle stop function on “Auto Idle Stop Timer Setting” screen.
OPERATION EXPLANATION OF COMPONENTS
3-79
To Next Page
Loading...
Need help?
General
