The automatic operation symbol on the air conditioner dis-
play lights up.
2.
Press switch △ or switch ▽ of the temperature control
switch to set to the desired temperature.
The air flow and combination of the vents are automatically
selected according to the set temperature and environ-
ment, and the air conditioner is operated automatically to
provide the set temperature.
REMARK
• If the air conditioner switch is not turned on when the
ambient temperature is high, air is not cooled and its
temperature may not decrease to the set temperature.
• After automatic operation, the air flow may be set to
“Low” for a certain period to prevent cold air from
blowing out, depending on the ambient temperature.
• Once the desired temperature is set, do not operate
the temperature control switch unnecessarily. It may
take longer time to reach the set temperature.
•
To heat or cool the air quickly, set the temperature dis-
play to 18.0 °C (max. cooling) or 32.0 °C (max. heat-
ing).
• If each switch is operated during automatic operation,
the function of that switch is applied first, the automat-
ic operation symbol on the air conditioner display goes
out, and the manual operation is selected.
METHOD FOR STOPPING AUTOMATIC OPERATION
Press the air conditioner OFF switch.
The display on the monitor goes out and the operation stops.
HANDLE AIR CONDITIONER OPERATION
3-266
To Next Page
Loading...
Need help?
General
