Paper and original information
3
bizhub PRO C6500 / bizhub PRO C6500e 3-13
Auto tray switch function
If the selected paper tray runs out of paper while a job is being printed and a
different paper tray is loaded with paper meeting the following conditions,
the other paper tray is automatically selected so printing can continue. If the
optional paper feeder unit PF-601 is installed, a maximum of 7,500 copies
can be made continuously. (The paper tray is automatically switched only if
the "ATS Permission parameter" in the utility mode is set to "Permit".)
Operating Conditions (Set the following condition at "01 System Setting\03
Feed Tray Setting" of user setting.)
- Select the paper tays to be selected automatically by "02 Feed Tray Auto
Selection", if Auto paper select is functioned.
Tray Priority is available.
- Select "On" at "03 ATS Permit Setting"
- Select the paper type setting of the tray which is automatically selected
when ATS functions at "04 Auto Paper Type"
Load the following paper into the paper trays.
- The same size in the same orientation.
- The same paper type.
To store copy paper
Observe the following precautions when storing the paper.
- Store paper in a cool, dry area. Using damp paper may cause a paper
misfeed.
- Keep partially used packages tightly wrapped during storage.
- Do not place paper packages vertically to store. Paper curl due to the
vertical storage may cause a paper misfeed.
To Next Page
Loading...
Need help?
General
