6
Basic job settings
6-28 bizhub PRO C6500 / bizhub PRO C6500e
6.4 Zoom
In the initial settings on the Copy screen, the magnification is automatically
set at 1.000 (full size).
This section describes how to change the magnification ratio.
6.4.1 Copying in 1.000 magnification mode
Follow this procedure to make a 100% copy of the original image.
1 Press [Reset] on the control panel. If the machine is equipped with the
ADF, close it securely before pressing [Reset].
– The initial setting will be restored. Check that [e 1.0] is highlighted
to indicate that the 1.000 magnification is selected.
2 Select additional copy conditions, as desired.
– Specifying paper size will release 1.000 magnification and set Auto
Zoom automatically. In this case, touch [e 1.0] to highlight it again.
!
Detail
The initial settings may be altered by the machine manager. For details,
see page 16-39.
To Next Page
Loading...
Need help?
General
