3
Paper and original information
3-14 bizhub PRO C6500 / bizhub PRO C6500e
3.2 Original information
When making copies, position the original into the ADF or on the original
glass.
To copy original that cannot be positioned into the ADF, position them on the
original glass.
Using original glass
Use the original glass when originals are not suitable for use with the
document feeder, e.g.,when size is incompatible, or when originals are
folded, stapled, torn, or in generally poor condition.
Unsuitable ADF originals
The following types of original should not be positioned into the ADF,
otherwise paper misfeeds, damage to the original or the machine trouble
may occur.
- Wrinlked, folded, curled, or torn original
- Highly translucent or transparent original, such as overhead
transparencies or trace paper
- Coated original such as carbon-backed paper
- Original printed on paper thicker 210 g/m
2
(use the Thick original mode
to copy original thicker 129 g/m
2
)
- Original printed on paper thinner than 35 g/m
2
(use the Thin original mode
to copy original thinner 49 g/m
2
)
- Original printed on paper thicker than 50 g/m
2
during double-sided
copying
- Original that are bound, for example, with staples or paper clips
- Original that are bound in a book or booklet
- Original that are bound together with glue
- Original pages that have been cut or contain cutouts
- Label sheets
- Offset printing masters
- Original with binder holes
- Original that have just been printed with this machine
To Next Page
Loading...
Need help?
General
