Color adjustment
7
bizhub PRO C6500 / bizhub PRO C6500e 7-23
7.4 Changing colors using RGB values
Change the color by modifying each value of red (R), green (G), and blue (B).
2
Note
In Full Color mode, this adjustment properly reflects on the strength of
each color (red, green, and blue) reproduced on a printed image.
Using Black or Single Color mode, this adjustment will operate to the
reproducibility of each color of colored original, giving effect to the
strength of black or single color on a printed image.
!
Detail
To reproduce the yellow part of the original which cannot be printed
normally in Single Color mode, make the Red stronger.
To change the hue of the printed image in Single Color mode, see
"Changing colors using CMYK value" on page 7-44.
To modify RGB value
1 Position the original.
2 Touch [Quality Adjust.] on the Copy screen.
The Quality Adjustment screen will be displayed.
To Next Page
Loading...
Need help?
General
