6
Basic job settings
6-12 bizhub PRO C6500 / bizhub PRO C6500e
0 Load the original in the ADF.
0 Combination of the original sizes to be mixed depends on the widest
original width (width of the ADF original guides). See "Positioning
originals into the ADF" on page 5-15 for details.
0 Do not load more than 100 sheets of the original, otherwise the original
may be misfed or damaged, or machine trouble may be caused.
If the number of original sheets exceeds 100, divide them into blocks to
scan. For details, see "Separate Scan mode" on page 6-23.
0 To scan the original from the original glass, Separate Scan mode is
required. For details, see "Separate Scan mode" on page 6-23.
0 With Mixed specified, Auto Paper Select will function automatically.
To copy onto a single and desired paper size, manually specify Auto
Zoom. For details, see page 6-32.
1 Position the original.
– Arrange the mixed size originals aligning the left and rear sides.
For details, see "Positioning originals into the ADF" on page 5-15.
2 Touch [Original Setting] on the Copy screen.
The Original Setting screen will be displayed.
3 Touch [Mixed] to highlight it.
4 Touch [OK] to complete the setting and return to the Copy screen.
– Touch [Default Set] to restore the initial setting, or touch [Cancel] to
resume the previous setting.
To Next Page
Loading...
Need help?
General
