Konica Minolta BIZHUB PRO C6500 User Manual

14
Machine adjustment
14-92 bizhub PRO C6500 / bizhub PRO C6500e
4 Touch [COPY] tab.
The Copy Screen will be displayed.
5 Load the desired size of paper on the tray to be adjusted, specify
Punch, then press [Start] on the control panel.
A sample pattern (No. 16) will be output.
6 Check whether or not the punch position is skew on the output sheet.
7 If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
The Registration Adjustment Screen will be restored.
8 Touch [+ 5 -] to specify the value to be positive or negative. Use the
touch panel keypad to enter the desired adjustment value, then touch
[<<SET].
Available range: -50 (wide) to +50 (narrow), 1 step = 0.1 mm
9 Repeat the adjustment steps from 3 to 8 until the desired result is
obtained.

Konica Minolta BIZHUB PRO C6500 Specifications

General

Monthly Duty Cycle	300, 000 pages
Duplex Printing	Yes
Scanner Type	Color Scanner
Scanner Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Print Speed	65 ppm (color and B&W)
Resolution	1200 x 1200 dpi
Connectivity	Ethernet, USB
Operating System Compatibility	Mac
Color Capability	Full color
Copy Speed	65 ppm (color and B&W)