95
RECORDING MODE RESET
The recording mode functions can be reset in section 1 of the recording menu (p. 80).
When selected, a confirmation screen will appear; choosing “Yes” resets the following
functions and settings, “No” cancels the operation.
Exposure compensation 0.0 p. 59
Flash compensation 0.0 p. 59
Drive mode Single-frame advance p. 61
Anti-shake On p. 37
White balance Auto p. 70
White-balance shift 0 p. 70
Metering mode Multi-segment p. 69
Contrast compensation 0 p. 79
Color-saturation compensation 0 p. 78
Filter 0 p. 79
Focus area Wide focus frames p. 33
Flash mode Fill flash or red-eye reduction
1
p. 86
Flash control ADI p. 92
Sharpness Normal p. 97
1. The flash mode is reset to whichever of the two modes was last set.
Button shortcuts can be used to reset the recording mode (p. 132). The confirmation
screen will not appear in the shortcut operation.
To Next Page
Loading...
Need help?
General
