Konica Minolta DiMAGE A200 User Manual

28
G
ETTING UP AND RUNNING
SETTING THE DATE AND TIME
After initially inserting a memory card and battery, the camera’s clock and calendar must
be set. When images are recorded, the image data is saved with the date and time of
recording.
If the clock and calendar have not been set,
a message is displayed each time the
camera is turned on. This message is also
displayed if the clock and calendar reset
when the camera is stored without a battery
for a long time.
Use the left and right keys to select the item to be
changed.
Press the central button to set the clock and
calendar. The setup menu will be displayed.
Date/Time setting screen
Use the up and down keys to adjust the item.
2004 . 10 . 23
13 : 14
Date/Time set
:enter:move
:sel
YYYY/MM/DD
Use the left/right keys of the
controller to select “Yes.” “No”
cancels the operation.
Press the center of the controller to open the
date/time setup screen.
Set date/time.
Yes
No

Konica Minolta DiMAGE A200 Specifications

General

Brand	Konica Minolta
Model	DiMAGE A200
Category	Digital Camera
Language	English