DSP set
Noise reductn
Monitor amp.
Memory Save
Digital zoom
Off
Manual exp. Exp. priority
:enter
Select register
:select
98
R
ECORDING MENU
MEMORY - STORING CAMERA SETTINGS
To save the current camera settings, select
“Save” in the memory option in section 3 of the
recording menu. The register-selection screen
opens and the current camera settings are
displayed.
Camera settings cannot be deleted from memory by turning the camera off. They are
erased with the reset function in section 3 of the setup menu.
On the register-selection screen, use the left/right
keys of the controller (1) to select the memory
register in which to store the settings; any
previous settings are replaced. Press the central
button of the controller (2) to complete the
operation. The menu button cancels the operation
without saving the settings.
Five sets of camera settings can be saved in section 3 of the recording menu. This saves
time under frequently repeating conditions by eliminating the need to set the camera.
Except for functions like subject programs, date imprinting and instant playback, most
recording-mode camera settings will be saved including the position of the Flex Focus
Point, the selected spot AF area, the display format and changes made with the function
button or drive-mode button. Setting are displayed before being saved.
2
1
To Next Page
Loading...
Need help?
General
