97
FULL-TIME AF
Full-time AF continually focuses the camera when using spot AF areas and the FFP so
the monitor image is always sharp. This also reduces the autofocusing time when taking
pictures. Full time AF is set in section 2 of the recording menu. The full-time AF can be
turned off to conserve power.
DIRECT MANUAL FOCUS
Direct manual focus allows manual adjustments to be made after the AF system has
locked onto the subject. Direct manual focus is activated in section 2 of the recording
menu (p. 84). Direct manual focus is canceled when continuous AF or manual focus (p.
44) is in use.
As described in the basic recording operation
section (p. 30), press the shutter-release button
partway down to lock the focus (1); the focus
signal will turn white. “DMF” will be displayed next
to the drive-mode indicator.
While holding the shutter-release button partway
down, the camera can be manually focused with
the focusing ring (2); the Flex Digital Magnifier (p.
45) activates and an area indicated by the AF
sensor is enlarged. Always use the monitor image
to confirm focus. The approximate focusing
distance is displayed in the lower right corner next
to the frame counter. The Flex Digital Magnifier is
canceled when the shutter button is released or
the camera is not focused for several seconds.
2
1
To Next Page
Loading...
Need help?
General
