:enter
Memory recall
:select
99
MEMORY RECALL
Camera settings saved with the menu are recalled with the
exposure-mode dial. Simply turn the exposure mode dial to the
memory recall (MR) position (1); the register-selection screen
opens.
On the register-selection screen use the left/right keys of the controller (2) to select the
memory register in which the settings are stored; as the registers are selected the
camera settings are displayed on the screen. Press the central button of the controller (3)
to apply the settings to the camera. Turning the exposure-mode dial to another position
cancels the operation without recalling the settings.
To recall another set of settings in a different register, turn the exposure-mode dial to
another position and then back to MR to open the memory-recall screen. Saved memory
settings can also be assigned to the digital-subject-program positions on the exposure
dial with section 3 of the recording menu. See page 100 for more information.
2
3
1
To Next Page
Loading...
Need help?
General
