EasyManuals Logo
Home>Krone>Lawn Mower>EasyCut F 320 M

Krone EasyCut F 320 M User Manual

Krone EasyCut F 320 M
94 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
Safety 2
Basic safety instructions 2.4
EasyCut F 320 M
Original Operating Instructions 150000808_01_en 15
2.4.8 Jobs on the machine
Passengers
Passengers can be seriously injured by the machine or fall from the machine and be overrun.
Ejected objects may strike and injure passengers.
As a result, make sure that no one except the operator is on the machine.
2.4.9 Operational safety: Technically sound condition
Operation is only allowed after proper start-up
The operational safety of the machine is not ensured when it is not started up properly
according to these operating instructions. Thus accidents may be caused and persons may be
seriously injured and killed.
Only use the machine after proper start-up, refer to page38.
Technically sound state of the machine
Improper maintenance and setting could influence the operational safety of the machine and
cause accidents. Thus there is a risk of serious injuries or death.
All maintenance and setting work must be performed according to the chapters
“Maintenance and Setting”.
Before performing any maintenance and setting work, shut down and safeguard the
machine, refer to page24.
Danger resulting from damage to the machine
Damage to the machine may impair the operational safety of the machine and cause accidents.
As a result, people may be seriously injured or killed. The following parts of the machine are
particularly important for safety:
Brakes
Steering
Safety Devices
Connecting devices
Lighting equipment
Hydraulics
Tyres
Universal shaft
If there are doubts about the operational safety of the machine, for example due to an
unexpected change to the operational behaviour, visible damage or leaking consumables:
Shut down and secure the machine, refer to page24.
Immediately eliminate potential causes of damage, for example heavy soiling, or tighten
slack screws.
In case of damage which may affect operational safety and cannot be repaired according to
these operating instructions: Have damage repaired by a qualified service centre.

Table of Contents

Other manuals for Krone EasyCut F 320 M

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Krone EasyCut F 320 M and is the answer not in the manual?

Krone EasyCut F 320 M Specifications

General IconGeneral
BrandKrone
ModelEasyCut F 320 M
CategoryLawn Mower
LanguageEnglish

Related product manuals