Krone EasyCut F 320 M User Manual

Technical data 4
Consumables 4.1
EasyCut F 320 M
Original Operating Instructions 150000808_01_en 33
NOTICE
Mixing types of oil
If types of oil are mixed, the machine could be damaged.
 Never mix different types of oil.
 Before changing the type of oil, consult customer service. Never use engine oil.
Bio-degradable lubricants on request
4.1.1 Oils
Designation Filling quantity Specification Initial filling ex works
Input gearbox 0.5 l SAE 90 Wiolin ML 4 SAE 90
Main gearbox 0.4 l SAE 90 Wiolin ML 4 SAE 90
Cutterbar 7.0 l SAE 90 Wiolin ML 4 SAE 90
The filling quantities of the gearboxes are guide values. The correct values result from oil
change/oil level check, refer to page66.
4.1.2 Lubricating greases
Designation Filling quantity Specification
Manual lubrication points As required
1
Lubricating grease to DIN
51818 of NLGI class 2, Li
soap with EP additives
1
Lubricate the manual lubrication point until grease escapes at the bearing position. After
lubricating, remove the grease escaping from the bearing position.

Krone EasyCut F 320 M Specifications

General

Brand	Krone
Model	EasyCut F 320 M
Category	Lawn Mower
Language	English