Krone EasyCut F 320 M User Manual

Maintenance - General Information 11
Maintenance table 11.1
EasyCut F 320 M
Original Operating Instructions 150000808_01_en 59
Components
Check/replace retaining bolt (blade quick
fastener)
refer to page74
Check/replace blade carrier (blade quick
fastener)
refer to page75
Check/replace linings on cutterbar refer to page78
Vent friction clutch refer to page63
Tighten screws/nuts refer to page60
Check guard cloths refer to page64
11.1.3 Maintenance - Every 10 hours, but at least once a day
Checking oil level
Input gearbox refer to page66
Main gearbox refer to page67
Cutterbar refer to page79
Components
Changing/replacing blades refer to page71
Check/replace cutting discs/mower drums refer to page77
Check/replace retaining bolt (blade screw con-
nection)
refer to page74
Check/replace retaining bolt (blade quick
fastener)
refer to page74
Check guard cloths refer to page64
11.1.4 Maintenance - Every 50 hours
Components
Tighten screws/nuts on the machine refer to page60
11.1.5 Maintenance - Every 200 hours
Changing oil
Input gearbox refer to page66
Main gearbox refer to page67
11.1.6 Maintenance - Every 6 years
Components
Have the hydraulic hoses replaced by your
KRONE service partner

Krone EasyCut F 320 M Specifications

General

Brand	Krone
Model	EasyCut F 320 M
Category	Lawn Mower
Language	English