KTM 390 Duke Series 2019 User Manual

20 STORAGE
216
20.2 Preparing for use after storage
401059-01
– Take the motorcycle off the front lifting gear. ( p. 119)
– Remove the rear of the motorcycle from the lifting gear.
( p. 116)
– Install the 12-V battery. ( p. 172)
– Set the time and date. ( p. 78)
– Perform checks and maintenance measures when preparing for
use. ( p. 92)
– Take a test ride.

KTM 390 Duke Series 2019 Specifications

General

Displacement	373.2 cc
Bore x Stroke	89 mm x 60 mm
Torque	37 Nm @ 7, 000 rpm
Compression Ratio	12.6:1
Transmission	6-speed
Frame	Steel trellis frame, powder coated
Front Suspension	WP upside-down Ø 43 mm
Rear Suspension	WP monoshock
Front Tire	110/70 R17
Rear Tire	150/60 R17
Wheelbase	1, 357 mm
Seat Height	830 mm
Ground Clearance	170 mm
Fuel Tank Capacity	13.4 liters
Dry Weight	149 kg
Power	32 kW (43.5 hp) @ 9, 000 rpm
Fuel System	Electronic fuel injection (EFI)
Front Brake	320 mm disc brake
Rear Brake	230 mm disc brake
ABS	Bosch 9.1MB two-channel ABS
Engine Type	Single-cylinder, 4-stroke, liquid-cooled
Clutch	Wet multi-disc clutch, mechanically operated