KTM 390 Duke Series 2019 User Manual

COMBINATION INSTRUMENT 7
67
If the device is not automatically paired with the combina-
tion instrument after approx. 30 seconds:
– Restart the combination instrument or repeat the Pair-
ing procedure.
A suitable headset can be paired with the combination instrument
in the Headset menu.
7.17.9 Audio (optional)
V01165-01
Condition
• Function KTM MY RIDE (optional) activated.
• Function Bluetooth
®
(optional) activated.
• The Bluetooth
®
function should also be activated in the device
to be paired.
– Press the SET button when the menu is closed.
– Press the UP or DOWN button until KTM MY RIDE is marked.
Press the SET button to open the menu.
Warning
Danger of accidents Headphone volume which is too
high distracts attention from traffic activity.
– Always select headphone volume which is low
enough for you to still clearly hear acoustic signals.

KTM 390 Duke Series 2019 Specifications

General

Displacement	373.2 cc
Bore x Stroke	89 mm x 60 mm
Torque	37 Nm @ 7, 000 rpm
Compression Ratio	12.6:1
Transmission	6-speed
Frame	Steel trellis frame, powder coated
Front Suspension	WP upside-down Ø 43 mm
Rear Suspension	WP monoshock
Front Tire	110/70 R17
Rear Tire	150/60 R17
Wheelbase	1, 357 mm
Seat Height	830 mm
Ground Clearance	170 mm
Fuel Tank Capacity	13.4 liters
Dry Weight	149 kg
Power	32 kW (43.5 hp) @ 9, 000 rpm
Fuel System	Electronic fuel injection (EFI)
Front Brake	320 mm disc brake
Rear Brake	230 mm disc brake
ABS	Bosch 9.1MB two-channel ABS
Engine Type	Single-cylinder, 4-stroke, liquid-cooled
Clutch	Wet multi-disc clutch, mechanically operated